Télécharger Imprimer la page

KETRON XD Série Instructions Pour L'installation page 39

Publicité

VIDEO INTERFACE:
cod. 9AC134
Fig.4
Fix the card in the 2 points highlihted by the arrows.
Close the instrument.
1. CONNECTION
The Video card has a VGA socket on the outside which allows you
to connect it to a television or a computer monitor.
To connect it to the television set, 3 types wires are provided:
- SuperVHS (only for televisions which are provided with an S-VHS
system).
- Rca-Video
- Scart-Video
- The 3 wires are 2,70 m long in accordance with current rules and
regulations in the field of protection for similar devices.
2. PREDISPOSITION
Once you have connected it, you should predispose the television set
and the instrument correctly, as follows:
1) Select the AV channel on the television (Audio – Video).
2) Press button F3 – UTILITY on the instrument. Then press PAGE ›
to go into the second page.
3) Function F6 – VIDEO allows you to use the buttons VALUE ‹ ›
to select from the different Video options available:
PAL : European television system
NTSC : American television system
SVHS Pal : European Super VHS system
SVHS Ntsc : American Super VHS system
MONITOR : VGA Computer Monitor
OFF : excludes the Video card
If the connection is correct, the screen displays the vords Ketron.
If you activate Midifiles provided with text in Song Paly mode, the lyrics
will appear on the sceen (even if the instrument is on the Lyric Off
position and if it is not in the Mirror function).
3. NOTE
The functions can be stored on Power On Setup. Press Save/Enter,
then F3 - Power On Setup and F10.
39

Publicité

loading