Télécharger Imprimer la page

KETRON XD Série Instructions Pour L'installation page 12

Publicité

KIT HARD DISK:
CONTENUTO
- Folder 02 : Songs
- Folder 03 : X1 Styles
- Folder 04 : MS Styles
- Folder 05 : Style Registrations
NOTE
1) - I Folders 02, 03, 04, 05 sono protetti da dispositivo di Lock e non
permettono quindi cancellazioni o aggiunte di ulteriori files. Nel caso si
volessero modificare o editare tali Folders è necessario disinserire
prima la funzione Lock (Paragrafo Disk - Manuale Istruzioni
XD9 – XD3).
La modifica dei Folders 02, 03, 04, 05 con l'aggiunta di nuovi files
comporta tuttavia un aggiornamento nell'ordine alfabetico della
directory e pertanto le Liste in dotazione all' Hard Disk non rispettano
più l'esatta numerazione e la corrispondenza con i vari files.
La KETRON, sulla base di tali Liste, non risponde del contenuto
di Hard Disk che risultino manomessi o alterati da parte dell'utente.
2)- Ricordiamo inoltre che la funzione Disk Format comporta
la cancellazione irreparabile di di tutti i dati contenuti nell'Hard Disk.
Evitare quindi assolutamente involontarie operazioni di formattazione.
I
Drawing 1a, illustrates the "open" instrument and the area in which
the device is to be fitted.
Disconnect the two keyboard connectors fitted. (fig. 1b)
Disconnect the yellow/green earth wire by unscrewing the self-tapping
screw fitted.
Remove the keyboard.
Remove the 4 PB355 controller board securing screws. (fig.2)
Turn the controller board backwards without removing the connection
wires. (fig.3)
Unscrew the hexagon nuts fitted on the 4 screws underneath
the controller board. (fig.3)
Fix the supporting bracket that is already assembled with the Hard
disk, using the four nuts and washers that were removed previously.
(fig.4)
Re-position the controller board, re-tighten the four screws and restore
12
cod. 9HD001 - 9HD002 - 9HD003

Publicité

loading