Application As Directed - Lenze ERB Série Mode D'emploi

3 Product description

Application as directed

3.3 Application as directed
Brake resistors
must only be actuated under the operating conditions specified in these
ƒ
operating instructions.
are components
ƒ
–
for mounting in a machine.
–
for assembly with other components to a machine.
Commissioning of the brake resistor is prohibited until it has been
determined that the machine into which the brake resistor is to be mounted
complies with the regulations of the EC Machinery Directive.
are electrical equipment for mounting in control cabinets or similar closed
ƒ
electrical operating areas.
comply with the protective requirements of the "Low voltage" EC
ƒ
Directive.
are not machines as defined by the Machines EC Directive.
ƒ
are not household appliances, but are only designed as components for
ƒ
subsequent commercial use.
Drive systems with brake resistors
The responsibility for compliance with the EC Directives in the machine
ƒ
application is that of the re−user.
Any other use shall be deemed inappropriate!
40
l
EDKRBG018R DE/EN/FR/ES/IT 8.0