Residual Hazards - Lenze ERB Série Mode D'emploi

2.2

Residual hazards

{
Danger!
Dangerous electrical voltage
The terminals of the brake resistor may carry dangerous voltages
during operation of the basic device and up to three minutes after
mains disconnection.
Possible consequences:
ƒ
Protective measures:
ƒ
ƒ
ƒ
}
Danger!
Hot surface during operation
During operation, the brake resistor becomes very hot. (For
temperatures, see Technical data.)
Possible consequences:
ƒ
ƒ
Protective measures:
ƒ
ƒ
ƒ
EDKRBG018R DE/EN/FR/ES/IT 8.0
Death or severe injuries when touching the terminals.
Before working on the brake resistor disconnect the basic device
from the mains.
Check all power terminals for safe isolation from supply.
Select the mounting location so that the operating conditions
mentioned in the technical data are always ensured.
Severe burns when touching the brake resistor.
Fire or smouldering fire if flammable materials or substances are
placed near the brake resistor or may get to it.
Before working on the brake resistor, check its surface
temperature.
Select the mounting location so that the operating conditions
mentioned in the technical data are always ensured.
Protect the mounting location by suitable fire prevention and
protection against contact.
l
Safety instructions
Residual hazards
2
35