EINHELL GH-BC 25 AS Mode D'emploi D'origine page 21

•
Open the packaging and take out the equip-
ment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
available).
•
Check to see if all items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, please keep the packaging until
the end of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or suff ocating!
•
Petrol scythe mower
•
Guide pin
•
Operating handle
•
Operating handle retainer
•
4 ea. screws M5 (20 mm)
•
4 ea. nuts M5
•
Carrying strap
•
4 ea. screws M5 (25 mm)
•
Trimming blade
•
Spool with nylon line
•
Driving plate
•
Pressure plate
•
Pressure plate cover
•
Nut M10 (left-hand thread)
•
Combined oil/petrol cylinder
•
Spark plug wrench
•
Open-ended spanner 8/10mm
•
Allen wrench 4 mm
•
Allen wrench 5 mm
•
2 ea. tie wraps
•
Knurled screw M6
•
Nut M6
•
Washer Ø 6mm
•
Protective hood for nylon line/trimming blade
•
Screwdriver
•
Original operating instructions
•
Safety instructions
Anl_GH_BC_25_AS_SPK1.indb 21 Anl_GH_BC_25_AS_SPK1.indb 21
GB
3. Proper use
The power scythe (using the cutting blade) is
designed for cutting young trees, strong weeds
and undergrowth. The power trimmer (using the
line spool with cutting line) is designed for cutting
lawns, grassed areas and small weeds. The ope-
rating instructions as supplied by the manufactu-
rer must be obeyed to ensure that the equipment
is used properly. Any use which is not expressly
permitted in the manual may result in damage
to the equipment and place the user in serious
danger. Be sure to observe the restrictions in the
safety instructions.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
equipment is used in commercial, trade or indust-
rial businesses or for equivalent purposes.
Important. Due to the high risk of bodily injury
to the user, the petrol power scythe must not be
used to carry out the following work: to clean dirt
and debris off walkways, or to chop up tree or
hedge clippings. Similarly, the petrol power scythe
must not be used to level out high areas such as
molehills. For safety reasons, the petrol power
scythe must not be used as a drive unit for other
work tools or toolkits of any kind.
The equipment is allowed to be used only for its
prescribed purpose. Any other use is deemed to
be a case of misuse. The user/operator and not
the manufacturer will be liable for any damage or
injuries of any kind resulting from such misuse.
- 21 -
19.03.15 11:11 19.03.15 11:11