Publicité
Les langues disponibles
Les langues disponibles
5.3
Mounting the bracket
5.4
Mounting the floating probe
1. Mount the probe in such a way that it is suspended at the height/level of
the required switching point.
- Do not suspend the probe directly from the control unit.
2. Use a cable clamp or the cable gland to fasten the probe and provide
strain relief.
3. Fasten the probe with the enclosed cable G1 gland.
Mounting
1. Mount the bracket to a wall or a
container (vertical or horizontal)
using a screw.
OM 5 / OM 5+1 / OM 1
EN
19
Publicité
