5-Step Installa On Guide - Gallagher M50 Notice D'utilisation

5-Step Installa on Guide

5 STEP INSTALLATION GUIDE
Step 1. Mount the Energizer
The energizer is easy to install. Mount the energizer on a wall,
under cover, out of reach of children, adjacent to a power outlet.
Install where there is no risk of the energizer incurring fi re or
mechanical damage.
1. Using the the template on the centre page as a drilling
guide, drill 2 x 4mm (5/32") holes (A & B).
2. Fix the screws provided into the wall leaving the head
of the screw about 3mm (
3. Place the energizer over and slide down onto the
moun ng screws.
Step 2. Install the earth system
Buildings and gates for example, can become electrifi ed with fence voltages if the
energizer is improperly earthed.
Follow earthing instruc ons carefully.
a
Earth Clamp
(G8760)
8
Gallagher 3E1802 Small Mains Energizer User Manual
1
/ ") out from the wall.
8
All live wire system
(for areas with good earthing systems)
RED
HobbyMaster
M50
GREEN
Earth Stake
(G8790)
The animal must touch the wire and
the ground to feel a shock
a
b
Live
Live
Live