Fig.2: from Mooring to Sailing
1. Press and hold the BEFORE USE
MOORING
and AFTER USE buttons
MODE
simultaneously
2. After 3 seconds, the sensor LED
will flash.
Hold down.
3. After 5 seconds, the backlight
LED will flash
Release the buttons.
4. Pump activation to empty the
SAILING MODE
bowl.
NOTE: at the end of the cycle, the toilet remains empty if the system is set in "Sailing
mode". Alternatively, a small amount of water remains in the toilet if the system is set
in "Mooring mode".
Tecma S.r.l.
Via Flaminia | Loc. Castello delle Formiche
05030 Otricoli (TR)
ITALY
Compact line | Installation and use manual | ENG
52
T +39 0744 709071
F +39 0744 719833
info@tecma.eu
www.thetfordmarine.com