Electrical System; Electrical Requirements; All-In-One Sft Control Panel; One Button - Thetford Marine TECMA Compact Line Manuel D'installation Et D'utilisation

4. TECMA COMPACT LINE ELECTRICAL SYSTEM
4.1

Electrical requirements

Installation requirements:
■ All circuits must follow ABYC/ISO standards.
■ Wire gauge sizes must follow Wire Gauge Size Chart.
■ Every toilet must have its own circuit breaker or fuse.
■ Always use crimp-style connectors with Sealing provisions to avoid corrosion.
DANGER – HAZARD OF FIRE: use recommended circuit breakers or fuses. Failure to
follow the recommendations can result in fire.
4.2

All-in-one SFT control panel

One button

Press the "FLUSH" button to start the automatic flush cycle, after which the toilet will be
refilled with a small amount of water, ready for the next use.

Two buttons

Press the "BEFORE USE" button before using the toilet. This will fill the toilet with a small
amount of water. Press the "AFTER USE" button after using the toilet. This will start the
automatic flush cycle, which will empty the toilet.
BEFORE USE
Tecma S.r.l.
Via Flaminia | Loc. Castello delle Formiche
05030 Otricoli (TR)
ITALY
Compact line | Installation and use manual | ENG
47
FLUSH
TANK LEVEL
AFTER USE
TANK LEVEL
T +39 0744 709071
F +39 0744 719833
info@tecma.eu
www.thetfordmarine.com