Pausing During Play (Pause); Ejecting A Cd - Bosch Calais USB40 Mode D'emploi Et De Montage

CD operation
"RPT TRK" appears briefly on the display and
the RPT symbol is displayed. The current track
is repeated continuously until you deactivate
RPT.
Exiting RPT
f Press the 2 < button again.
The display briefly shows "RPT OFF" and the
RPT symbol disappears. Normal playback is
then resumed.

Pausing during play (PAUSE)

f Press the 1 < button.
The display shows "PAUSE".
Continuing after the pause
f Press the 1 < button during the pause.
Play continues.

Ejecting a CD

Note:
You can also eject CDs while the
device is switched off or another
audio source is activated.
f Press the CD eject button 4 .
The CD is ejected. If you are in CD operating
mode, "CD EJECT" will briefly appear on the
display.
Note:
You must not hinder or assist the
drive as it ejects the CD.
f Remove the CD.
The CD symbol disappears.
Robert Bosch Car Multimedia GmbH
Note:
If you do not remove an ejected CD, it
is automatically pulled in again after
about 10 seconds.
7 620 000 130 - 133 | 10.2010
en | 51