Before Initial Use; Operating The Roof Air Conditioner; Basic Notes On Operation - Dometic FRESHJET 3000 Notice D'utilisation

Masquer les pouces Voir aussi pour FRESHJET 3000:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 49

Before initial use

6
Before initial use
Inspection before starting up
Before you switch on the roof air conditioner, observe the following:
➤ Check whether the supply voltage and frequency correspond to the values
specified in the technical data (see leaflet).
➤ Ensure both the air intake opening and the air nozzles are free. All ventilation
grilles must always be kept free to ensure that the roof air conditioner is able to
operate at maximum capacity.
!
CAUTION! Beware of injury
Do not insert your fingers or objects into the air nozzles or the intake
grille.
Set the remote control
➤ Insert the batteries (see chapter "Replacing the remote control batteries" on
page 20).
✓ The display shows all symbols for 5 seconds.
✓ The remote control is ready for operation.
7

Operating the roof air conditioner

7.1

Basic notes on operation

The roof air conditioner has three operating modes:
Operating mode
Off
Stand-by
On
You can use the control panel to
• switch the roof air conditioner to and from stand-by mode
• switch the ambient lights on and off
14
Features
The roof air conditioner is switched off.
The remote control is inactive.
The roof air conditioning is ready for operation and can be switched
on with the remote control. The ambient lights are available.
The roof air conditioner is conditioning the air in the interior.
FreshJet3000
a
EN

Publicité

Table des Matières
loading

Table des Matières