CONTENTS | SPECIAL INFORMATION
SPECIAL INFORMATION
OPERATION
1.
1.1
1.2
1.3
2.
Safety �������������������������������������������������������� 23
2.1
Intended use ����������������������������������������������������� 23
2.2
2.3
Test symbols ����������������������������������������������������� 24
3.
4.
5.
6.
7.
Safety �������������������������������������������������������� 25
7.1
7.2
8.
8.1
8.2
Accessories ������������������������������������������������������� 25
9.
Preparations ������������������������������������������������ 25
9.1
9.2
9.3
9.4
10.
Installation �������������������������������������������������� 26
10.1
10.2
10.3
10.4
10.5
11.
11.1
11.2
12.
Shutdown ��������������������������������������������������� 34
13.
14.
Maintenance ������������������������������������������������ 35
14.1
14.2
15.
Specification ������������������������������������������������ 36
15.1
15.2
15.3
15.4
15.5
15.6
Data tables ������������������������������������������������������� 39
22
| SBP 100
168843_SBP_100_de_en_fr_cs_pl.indb 22
SPECIAL INFORMATION
- The appliance may be used by children aged 8
and older and persons with reduced physical,
sensory or mental capabilities or a lack of ex-
perience and know-how, provided that they are
supervised or they have been instructed on how
to use the appliance safely and have understood
the resulting risks. Children must never play with
the appliance. Children must never clean the ap-
pliance or perform user maintenance unless they
are supervised.
- Immersion heater accessory: The connection to
the power supply must be in the form of a per-
manent connection. The appliance must be able
to be separated from the power supply by an iso-
lator that disconnects all poles with at least 3 mm
contact separation.
- Secure the appliance as described in chapter "In-
stallation / Preparations".
- Observe the maximum permissible pressure (see
chapter "Installation / Specification / Data table").
- Regularly activate the safety valve to prevent it
from becoming blocked.
- Drain the appliance as described in chapter "In-
stallation / Maintenance / Draining the appliance".
- Install a type-tested safety valve.
- Fit the discharge pipe of the safety valve with
a constant downward slope and in a room free
from the risk of frost.
- The safety valve discharge aperture must remain
open to the atmosphere.
www.stiebel-eltron.com
04.09.2017 13:52:49