Timer; Channels - Panasonic CT-27E13-1 Manuel D'utilisation

I M O
C ON ENU PERATION

TIMER

CLOCK SET
r TIME - Set the time of the day.
r Day - Set the day of the week.
Procedure
Use t VOL , VOL u and CH q to set time and day.
Note:
SLEEP
r How Long? - Select 30, 60 or 90 minutes for TV to turn
off. Select NO to turn off Sleep timer.
TIMER 1 AND TIMER 2
Select one or both timers to turn the television on and off at
selected times, on selected channels, and on selected
days. Time must be entered in CLOCK SET to operate the
TIMER features.
Procedure
Use the VOL u and CH q to set day, On Time, Off
•
Time and Channel number, then use the VOL u to
activate.
Notes:
• The television automatically turns OFF after 90 minutes
when turned ON by the TIMER.
selected or if a key is pressed, the automatic OFF after
90 minutes will becancelled.
• The TIMER is active when the television is OFF or ON.
The television will switch to the selected channel at the
selected time set in the TIMER.
12 l

CHANNELS

FAVORITES
r CHANNEL SCAN FAV - To enter up to 16 favorite
channels.
Note:
r CHANNEL SCAN ALL - To scan all channels when
using the CH up/down buttons.
CAPTION
r MANUAL CAPTION - To enter numbers and captions
manually.
Note:
r INPUT LABEL - To label video input connections for
onscreen display.
Procedure
•
•
•
•
VIDEO INPUT SKIP FEATURE
If the OFF time is
This receiver has a Video Input Skip Feature, which will
allow the user to skip desired input modes when pressing
TV/VIDEO button.
Procedure
•
r To delete skip feature, press the VOL u button while the
desired video input mode is highlighted.
Use remote numeric keypad to select desired FAV
channels.
Use the remote numeric keypad to select desired
channel (refer to your local TV guide).
Press CH p or CH q to select the desired Video input.
Press t VOL or VOL u to select the first character.
Press CH q to enter the next position and repeat the
step above to enter the next character.
Repeat above steps until all characters are entered.
Press t VOL while the first character is highlighed to
skip selected video input.