Pioneer XR-A370 Mode D'emploi page 2

Energy-saving design
This system is designed to use minimal electricity when-
power is switched OFF (during Standby).
Regarding the value of the Power Consumption in standby
mode, refer to specifications on page 47.
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE.
This product complies with the Low Voltage Directive (73/23/
EEC), EMC Directives (89/336/EEC, 92/31/EEC) and CE Marking
Directive (93/68/EEC).
IMPORTANT
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated "dangerous voltage" within the
product's enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
CAUTION
This product contains a laser diode of higher class than 1.
To ensure continued safety, do not remove any covers or
attempt to gain access to the inside of the product.
Refer all servicing to qualified personnel.
The following caution label appears on your unit.
Location: rear of the unit
CLASS 1
LASER PRODUCT
IMPORTANT
FOR USE IN THE UNITED
KINGDOM
The wires in this mains lead are coloured in
accordance with the following code:
Blue : neutral
Brown : live
If the plug provided is unsuitable for your socket outlets, the
plug must be cut off and a suitable plug fitted.
Thank you for buying this Pioneer product.
Please read through these operating instructions so you will know
how to operate your model properly. After you have finished reading
the instructions, put them away in a safe place for future reference.
In some countries or regions, the shape of the power plug and power
outlet may sometimes differ from that shown in the explanatory
drawings. However, the method of connecting and operating the unit
is the same.
2
En/Fr
Conception visant à réduire la consomma-
tion électrique
Cet ensemble a été conçu de telle sorte que la consomma-
tion d'énergie électrique est aussi réduite que possible
pendant les périodes de veille.
Pour connaître la valeur de la puissance consommée pen-
dant les périodes de veille, veuillez vous reporter aux car-
actéristiques techniques qui figurent aux pages 48.
ATTENTION:
CHOC ELECTRIQUE OU DE DEBUT D'ENCENDIE, NE PAS
EXPOSER CET APPAREIL A L'HUMIDITE OU A LA PLUIE.
Ce produit est conforme à la directive relative aux appareils
basse tension (73/23/CEE), aux directives relatives à la compat-
ibilité électromagnétique (89/336/CEE, 92/31/CEE) et à la direc-
tive CE relative aux marquages (93/68/CEE).
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED SER-
VICE PERSONNEL.
ATTENTION
Ce produit renferme une diode à laser d'une catégorie supérieure
à 1. Pour garantir une sécurité constante, ne pas retirer les
couvercles ni essayer d'accéder à l'intérieur de l'appareil.
Pour toute réparation, s'adresser à un personnel qualitié.
La note suivante se trouve sulr le panneau arrière de cet appareil.
Emplacement: arrière de l'appareil.
The cut-off plug should be disposed of and must not be
inserted into any 13 amp socket as this can result in electric
shock. The plug or adaptor of the distribution panel should be
provided with a 5 amp fuse. As the colours of the wires in the
mains lead of this appliance may not correspond with coloured
markings identifying the terminals in your plug, proceed as
follows:
The wire which is coloured blue must be connected to the
terminal which is marked with the letter N or coloured black.
The wire which is coloured brown must be connected to the
terminal which is marked with the letter L or coloured red.
Nous vous remercions de l'achat de cet appareil Pioneer.
Lisez ces directives pour apprendre comment utiliser cet appareil.
Conservez-les ensuite afin de pouvoir vous y référer ultérieurement.
Dans certains pays ou certaines régions, la fiche et la prise de courant
peuvent parfois prendre une autre forme que celle qui figure dans les
illustrations. La façon de raccorder et de faire fonctionner l'appareil
est toutefois la même.
AFIN DE PREVENIR TOUS RISQUES DE
The exclamation point within an equilateral triangle is intended
to alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature
accompanying the appliance.
CLASS 1
LASER PRODUCT
Do not connect either wire to the earth terminal of a three-
pin plug.
NOTE
After replacing or changing a fuse, the fuse cover in the plug
must be replaced with a fuse cover which corresponds to
the colour of the insert in the base of the plug or the word
that is embossed on the base of the plug, and the appliance
must not be used without a fuse cover. If lost, replacement
fuse covers can be obtained from your dealer.
Only 5 A fuses approved by B.S.I. or A.S.T.A. to B.S. 1362
should be used.