Bosch ART 23 SL Notice Originale page 11

Masquer les pouces Voir aussi pour ART 23 SL:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 16
OBJ_BUCH-2058-004.book Page 11 Tuesday, January 3, 2017 11:21 AM
 Work only in daylight or in good arti-
ficial light.
 Avoid operating the trimmer in bad
weather conditions especially when
there is a risk of lightning.
 Operating the trimmer in wet grass
decreases the efficiency of perfor-
mance.
 Switch off when transporting the
trimmer to and from the area to be
worked on.
 Switch on the trimmer with hands
and feet well away from the rotating
line.
 Do not put hands or feet near the
cutting system.
 Never fit metal cutting elements to
this trimmer.
 Inspect and maintain the trimmer
regularly.
 Have the trimmer repaired only by
an authorized customer service
agent.
 Always ensure that the ventilation
slots are kept clear of debris.
 Take care against injury from the
blade fitted for cutting the nylon line
length. After feeding line always re-
turn the trimmer to its horizontal op-
erating position before switching
on.
 Switch off and remove the plug from
the socket:
– whenever you leave the machine
unattended for any period
– before replacing the cutting lline
– if the cable is tangled
– before cleaning or working on the
trimmer
Bosch Power Tools
 After use, disconnect the machine
from the mains and check for dam-
age.
 Store the machine in a secure, dry
place out of the reach of children.
Do not place other objects on top of
the machine.
 Replace worn or damaged parts for
safety.
 Ensure replacement parts fitted are
Bosch approved.
 Do not operate the machine with-
out the trimmer attachment fit-
ted.
Electrical Safety
 Switch off and disconnect the ma-
chine before using manual-feed
button (see figure 9). This button
should only be used in the event of
an obstruction of the cutting line.
 Warning! Switch off, remove plug
from mains before adjusting,
cleaning or if cable is cut, dam-
aged or entangled.
 The cutting line continues to ro-
tate for a few seconds after the
trimmer is switched off.
 Caution – do not touch rotating
cutting line.
Your machine is double insulated for
safety and requires no earth connec-
tion. The operating voltage is 230 V AC,
50 Hz (for non-EU countries 220 V).
Only use approved extension cables.
Contact your Bosch Service Centre for
details.
F 016 L81 433 | (3.1.17)
English | 11

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Art 26 slArt 2300Art 23-283 600 ha5 03 600 ha5 1

Table des Matières