Fixing The Sunshield; Installation; Fixing Of Housing To Support; How To Install The Camera - Videotec PUNTO Manuel D'instructions

6.1.3 Fixing the sunshield

It's possible to fix the sunshield to the housing using
screws, washers and spacers provided.
Fig. 4

6.2 Installation

6.2.1 Fixing of housing to support

Apply a thread-locker on the holes of the
screws (Loctite 243®).
Fix the housing to the support using the supplied
screws.
Fig. 5
Fixing on support with external cable passage.
Fig. 6
Fixing on support with internal cable passage.
6

6.2.2 How to install the camera

Fasten the camera with the 1/4" screw (03). To
position the camera and lens correctly, if necessary,
use the supplied spacers. (04).
01
Fig. 7
Fasten down the adjustable slide in the correct
position using the appropriate screws.
Fig. 8
03
02
MNVCHOT_1511_EN