Changing The Illumination Color; Storing The Sound Characteristics Of Each Source; Source Tone Memory Function; Muting The Beep Tone - Sony Ferrari XR-F21RDS Mode D'emploi

Changing the Illumination
Color
INTRO
1
Press the button while pressing
the button.
SEL
You can choose the color between amber and
green.
Storing the Sound
Characteristics of each
Source

— Source Tone Memory Function

BANK
4
Press the button while pressing
SEL
the button. n "STM" will appear
on the display.
EN
This function memorizes the adjusted sound
characteristics (the bass, treble, and different
between volume and sub output level) of each
programme source. With this function, you can
listen to the same source always in the same
sound characteristics even after changing the
programme source or tuning the unit off and
on again.
To cancel the STM function, press these
buttons again.
14
Actual total number:

Muting the Beep Tone

BL.SKIP
6
Press the button while pressing
the button.
SEL
To obtain the beep tone again, press these
buttons once more.
Enjoying Bass and Treble
even at Low Volume

— Loudness Function

Press the 7 button while pressing
the SEL button. n "LOUD" will appear
on the display.
Bass and treble will be reinforced. To cancel,
press these buttons again.
Changing the Brightness
of the Display Window
9
Press the button, while pressing
the button.
SEL
The display window Brightness will be
dimmed.
To change to the original Brightness, press
these buttons again.
E
Sony XR-F21RDS ( ,F,G)
0-000-000-11 (1)