Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Installation and connection
•
Discard the complete packing material after unpacking the device.
•
Place the device on top of an even and safe surface which supports the weight of the
device.
•
Never at any time place the device on an flammable surface (such as: carpet, etc.).
•
Do not place the device near the open fire sources, electric ovens, heating stoves or
other heat sources, for example direct sunlight. Exposition to high temperatures may
cause damage to the device surface or may negatively influence cooling power and
energy consumption.
•
In order to avoid failures of the compressor when assembling or transporting the
refrigerated showcase, it should not be tilted over an angle of 45° at any time. Always
use condenser and door with care as damages affect the optimal use.
•
Set up the refrigerated showcase at an ample place, where a proper air circulation is
possible. A minimum distance of 5 cm must be kept to walls and other items.
•
Do not set up the refrigerated showcase at places with high humidity or high
temperatures, as these effects may damage the device.
•
For the first time use, wait for 2 hours after handling and then plug the wall socket and
start it.
•
Never punch holes into the refrigerated showcase. Never install foreign matters/
substances on the Refrigerated showcase.
•
Never put any heavy load on the top of the refrigerated showcase.
•
Position the device in a way so that the power plug is always accessible.
Operation
•
Clean the device prior to first use.
•
Wash the grids in warm water and mild cleaning agent prior to placing them inside the
refrigerated showcase.
•
Clean the inside and outside of the device with a soft, moist sponge. Dry the device
thoroughly.
•
Insert the plug into a grounded outlet.
•
Beverages and foodstuffs can only be stored when the device has reached sufficient
cooling capacity.
•
The refrigerated showcase has been designed for a maximum weight allowance of 60 Kg
and each grid has a max. weight allowance of 20 Kg.
Temperature adjustment
The ideal temperature settings have been programmed at the factory and are between 2°C
(lower temperature limit) and 6 °C (upper temperature limit). These settings allow the
refrigerated showcase to function in the temperature range of approx. 2° – 12°C.
Factory settings cannot be changed by the user!
19
- 19 -
Publicité
Chapitres
Table des Matières
Dépannage
