Télécharger Imprimer la page

EUFAB 11232 Manuel De L'opérateur page 4

Publicité

3. SPECIFICATIONS
For U-bracket diameter:
For bicycle frame diameter:
4. SAFETY PRECAUTIONS
• Keep children away and do not allow children to operate this device!
• Only use this product for its designated purpose!
• For your own safety, only use accessories and spare parts that are stated in these instructions or that are recommended by the manufacturer!
• If the frame holder is visibly damaged, safe use is no longer possible. The frame holder may thus no longer be used.
• Observe the speci cations and safety precautions in the instructions for your bicycle rack!
5. OPERATING INSTRUCTIONS
1
Lockable knob nut
2
Spacer
3
Frame clip
4
Lock screw M8
5
Tube
6
U-bracket cu
7
Plug
8
Rubber inserts Ø 25 mm and Ø 30 mm
6. MOUNTING THE FRAME HOLDER
Before you can use the lockable frame holder, you must rst dismantle it. First unscrew the knob nut. Now remove the spacer and the frame clip. Place the thread of the lock
screw onto a rm surface and carefully push the tube in the direction of the surface. The screw head will now push the plug out of the U-bracket cu . Pull the lock screw out
completely. Wrap the appropriate rubber insert for your bicycle rack around the U-bracket at a suitable position for your bicycle. Open the bracket cu and place it around the
rubber insert. Push the bracket cu to close. The rubber insert may not be folded or crushed as you do so. Replace the lock screw. First t the frame clip and then the spacer onto
the threaded end of the lock screw. The curved side of the spacer must face the frame clip. Push the frame clip together and push in the direction of the bracket cu to expose
su cient thread of the lock screw. Now put the knob nut onto the thread and then tighten securely to ensure that all parts are tted and brought together. Insert the plug back
into the top of the bracket cu .
7. SECURING A BICYCLE USING THE FRAME HOLDER
Rotate the knob nut anti-clockwise until the frame clip has opened su ciently to accommodate the bicycle frame. Insert the bicycle frame into the frame clip. Rotate the knob
nut clockwise until the frame clip loosely encompasses the bicycle frame. Align the bicycle and the frame holder to ensure that it all ts together. Now tighten the knob nut
rmly.
You can only lock the frame holder when it has been closed securely.
Insert the key into the lock of the knob nut and turn so that the red marking faces the lock icon. Remove the key. Your bicycle is now secured to prevent theft.
CAUTION
Before travelling, you must rst secure the bicycle in accordance with the instructions of your bicycle rack (tensioning straps,
safety strap etc.)
Door de framehouders kunnen op het etsframe lichte drukplekken en beschadiging van de lak optreden. Bescherm het etsframe met
bijvoorbeeld beschermfolie
8. MAINTENANCE AND CARE
Clean the frame holder using a slightly moist, soft cloth and a mild cleaning agent. Do not use aggressive cleaning agents, solvents or petrol. Ensure that no cleaning agents or
liquids enter the tube of the frame holder.
Occasionally lubricate the lock with a resin-free oil, e.g. WD40.
Store the frame holder in a dry place.
9. NOTES REGARDING ENVIRONMENTAL PROTECTION
Please dispose of this device via the recycling bin or the public/municipal collection points.
The materials are recyclable. You make an important contribution to protecting our environment by recycling, material utilisation or other forms of reusing waste equipment!
10. CONTACT INFORMATION
EAL GmbH
Otto-Hausmann-Ring 107
42115 Wuppertal, Germany
4
25 mm and 30 mm
Length 11232:
Weight 11232:
30 – 60 mm
1
2
4
6
8
+49 (0)202 42 92 83 0
+49 (0) 202 42 92 83 – 160
12 cm
Length 11233:
0,450 kg
Weight 11233:
3
5
7
info@eal-vertrieb.com
www.eal-vertrieb.com
30 cm
0,655 kg

Publicité

loading

Ce manuel est également adapté pour:

11233