Product Dimensions; Cabinet Dimensions - Whirlpool W11439183A Instructions D'installation

Product Dimensions

A
D
F
A. Glass depth - black and white models - 21³⁄
Glass depth - stainless steel models - 22¹⁄
B. Glass width - 24" (60.9 cm) models - 23
Glass width - 30" (76.2 cm) models - 30
Glass width - 36" (91.4 cm) models - 36
C. Frame depth - 20 ⁄ " (51.6 cm)
5
16
D. Frame width - 24" (60.9 cm) models - 21
Frame width - 30" (76.2 cm) models - 29" (73.7 cm)
Frame width - 36" (91.4 cm) models - 34
E. Cooktop height with bottom heat shield - 3
Cooktop height lighted knobs - 4
F. Cooktop height including conduit (located at rear of cooktop, right
side) - 5" (12.7 cm)
Cooktop height lighted knobs, including conduit (located at rear of
cooktop, right side) - 6 / " (15.4 cm)
1
16
A
A. Location of Power Cord (length of power cord is
48" (121.9 cm), including the conduit)
B
C
E
" (55.2 cm)
4
" (56.4 cm)
8
/ " (60.5 cm)
13
16
/ " (78.4 cm)
13
16
/ " (92.3 cm)
5
16
/ " (55.7 cm)
59
64
/ " (87.5 cm)
7
16
⁄ " (9.8 cm)
7
8
15 / " (12.55 cm)
16

Cabinet Dimensions

IMPORTANT: If installing a range hood or microwave hood
combination above cooking surface, follow the range hood or
microwave hood combination installation instructions for
dimensional clearances above the cooktop surface.
C
L
E
K
A. 24" (60.9 cm) on 24" models; 30" (76.2 cm) on 30" models;
36" (91.4 cm) on 36" models
B. Side and rear surfaces illustrated by dashed box above, must meet
the minimum clearances to combustible material as defined in
dimensions K and L below.
C. 30" (76.2 cm) minimum clearance between top of cooktop
platform and bottom of uncovered wood or metal cabinet
(24" [61 cm] minimum clearance if bottom of wood or metal
cabinet is covered by not less than 1/4" [0.6 cm] flame retardant
millboard covered with not less than No. 28 MSG sheet steel,
0.015" [0.04 cm] stainless steel, or 0.024" [0.06 cm] aluminum
or 0.020" [0.05 cm] copper)
D. 13" (33 cm) recommended upper cabinet depth
E. 2" (5.1 cm)
F. 20¹⁄ " (52.0 cm) recommended cutout.
2
Will fit in cutout from 20³⁄ " - 20
8
G. 18" (45.7 cm) minimum clearance from upper cabinet to
countertop within minimum horizontal clearances to cooktop
H. Junction box or outlet: 7" (17.8 cm) minimum from top of
countertop
I. Junction box or outlet: 9" (23.0 cm) maximum from right side
of cabinet
J. 29¹⁄ " (74.9 cm) recommended cutout on 30" (76.2 cm) models.
2
Will fit in cutout from 29¹⁄
16
(76.2 cm) models.
35¹⁄ " (90.2 cm) recommended cutout on 36" (91.4 cm) models.
2
Will fit in cutout from 34 ⁄
9
16
(91.4 cm) models.
22 / " (56.67 cm) recommended cutout on 24" (61.0 cm)
5
16
Will fit in cutout from 22 / " - 22
1
4
24" (61.0 cm) models.
K. 2 / " (6.35 cm) minimum distance to nearest left and right side
1
2
combustible surface above cooktop
L. 1 / " (3.81 cm) minimum distance from the back of the cooktop
1
2
cutout to the nearest back side combustible surface above
cooktop.
NOTES: After making the countertop cutout, some installations
may require notching down the base cabinet side walls to clear
the cooktop base. To avoid this modification, use a base cabinet
with sidewalls wider than the cutout.
If cabinet has a drawer, a 5¹⁄
the top of the countertop to the top of the drawer (or other
obstruction) in base cabinet is required.
A
D
B
G
F
H
I
J
⁄ " (51.8 - 52.2 cm).
9
16
" - 29 9 ⁄ " (73.8 - 75.1 cm) on 30"
16
" - 35 ⁄ " (87.8 - 90.3 cm) on 36"
9
16
/ " (56.4 - 57.0 cm) on
3
7
" (14.0 cm) depth clearance from
2
3