Maintenance; After Each Use - Tecno Air System Tosai SRE 301 Mode D'emploi

MAINTENANCE

WARNING!
All cleaning and maintenance must be done after putting out flames, disconnecting
the plug from outlet after the Unit is entirely cooled down.
Do not disassemble safety devices, electromagnetic pumping unit, and other electri-
cal components.

After Each Use:

Always check that there is no flammable object
such as cloth, paper, around the heater.
Check that there is no oil leak or clog, or other liq-
uid leaks on a base plate or inside the Unit.
if oil leak or clog cannot be completely gotten
*
rid of or remains even after wiping out, stop
using the heater immediately and consult local
distributor or your nearest customer service
agent.
At Least Once A Week:
Use soft cloth to clean the Unit body.
Use a vacuum cleaner to remove dust on the warm air
blower (louver).
The warm air blower should be cleaned frequently to
avoid burning of dust which may cause unremovable
stains on the unit.
Diluted domestic chemical detergent on cloth may be
effective to the extreme stains.
Never use alkaline or acid-oriented detergent to
avoid rusting.
An air intake clogged with dust and/or lint is a potential cause of imperfect com-
bustion leading to accidental cease or ignition failure.
38