Fuel Filling - Tecno Air System Tosai SRE 301 Mode D'emploi

Fuel filling

Be sure that flames are completely extinguished before filling the liquid
*
combustible for mobile heater.
1. Lift fuel tank cover and pull out the tank.
Put the tank on the ground.
Tank removed, your heater will automatically
shutt off.
Place the fuel tank on a floor.
Unscrew the stopper.
2.
Fill the tank.
Place the tank on a flat, even floor, and use a fuel feeder.
Stop filling when a color of a half of the fuel gauge turns from silver to black.
3.
Fasten the cap.
Turn the cap clockwise as pushing it down hard, until it completely stops.
Improper fastening may cause leaks and a fire.
Wipe out any drops of kerosene.
Hold the tank upside down to check leaks.
*When carrying the tank, always hold two handles together for the safety.
*Avoid hitting the filler cap to be distorted. Distorted filler cap may cause liquid
combustible leaks.
*Be careful not to drop the tank.
4.
Replace the tank.
Carefully replace the filled tank into tank compartment.
CAUTION!
Be sure to wipe out any oil drop on and around the cap and threads with cloth.
Be careful not to stick fingers into gaps to prevent from being injured.
33