Charging Program For Lithium Accumulators - VOLTCRAFT VC-1506 Notice D'emploi

11. ChargIng prograM for lIthIuM aCCuMulators

+
If you want to charge a lithium battery, you have to first preselect the battery type in the first main menu
item „User Set Program" (basic settings).
• In the main menu, select the „USER" menu with the button „Batt Type/Stop".
• Press the button „Start/Enter"; the display shows the following, for example:
• Here you can select one of the three lithium accumulator types the charger is able to work with („LiPo", „LiIo",
„LiFe").
• Briefly press the button „Start/Enter". The voltage value then begins to flash.
-
• With the buttons „+>" or „
ding accumulator type changes in the top line:
• Confirm the selection of the lithium accumulator type with the button „Start/Enter", and the voltage value stops
blinking.
+
The settings made here for the lithium accumulator type then applies for ALL other functions, e.g.
charging, discharging, etc.
76
+
", you can select the cell voltage „3.3", „3.6" or „3.7". At the same time, the correspon-
-
<
- +
- +