Introduction; Intended Use - VOLTCRAFT VC-1506 Notice D'emploi

1. IntroduCtIon

Dear Customer,
In purchasing this Voltcraft® product, you have made a very good decision for which we would like to thank you.
Voltcraft® - In the field of measuring, charging and network technology, this name stands for high-quality products
which perform superbly and which are created by experts whose concern is continuous innovation.
From the ambitious hobby electronics enthusiast to the professional user, products from the Voltcraft® brand family
provide the optimum solution even for the most demanding tasks. And the remarkable feature is: we offer you the
mature technology and reliable quality of our Voltcraft® products at an almost unbeatable price-performance ratio. In
this way, we aim to establish a long, fruitful and successful co-operation with our customers.
We wish you a great deal of enjoyment with your new Voltcraft® product!
all names of companies and products are trademarks of the respective owner. all rights reserved.

. Intended use

The Multicharger VC-1506 is designed for private use in the model construction sphere.
The Multicharger VC-1506 is for charging batteries of the type NiCd or NiMH (1-15 cells), LiPo/LiIon/LiFe (1-6 cells)
as well as for lead acid cells (1-10 cells, 2V-20V). Depending on the batteries connected and their number of cells/
capacity, the charging current can be set between 0.1 A and 5.0 A. Batteries can also be discharged. The discharge
current can be 0.1-1.0 A. Up to five charging/discharging cycles can be set.
Four control keys and a two-line illuminated LC display are provided to operate the battery charger.
An integrated fan provides cooling for the battery charger during charging/discharging.
A balancer is integrated in the battery charger for LiPo/LiIon/LiFe batteries. On the side of the battery charger you
will find a combination plug for LiPo/LiIon/LiFe batteries with a differing number of cells.
The temperature sensor that comes with the unit can be connected to the battery charger to check the temperature
of the battery.
To monitor on a PC screen the curves indicating current, voltage, capacity and temperature, the unit includes a USB
port along with relevant software for connecting to a PC.
The battery charger is intended for operation on direct voltage of 11V= to 18V=. If required, however, an external
mains adapter can also be connected.
The product is intended for use in dry indoors, it must not get damp or wet!
59