JANE CONCORD Transformer iPLUS Mode D'emploi page 27

• Secure any luggage or other objects to reduce the risk of injuries in the event of an
accident.
• The instruction manual should always be kept with the safety seat.
• The use of accessories and replacement parts is not permissible and shall lead,
in the event of contravention, to the expiry of all claims under the warranty and of all
liability claims. Only special JANÉ-CONCORD original accessories are excluded.
• Suitable for cars with three-point (lap and diagonal) seat belts tested in accordance
with ECE Regulation 16 or a comparable standard.
• WARNING: Make sure you are aware of the road traffic legislation of the country in
which you are driving. The use of your child restraint system may be restricted.
The buckle of the vehicle safety belt must not come above the edge of the lap belt
guide. If in doubt or if you are still uncertain, please contact JANÉ-CONCORD. The
belts may only be routed via the points of contact and the positions on the seat stated
in the user instructions. Belts must not be routed in any other way.
If the car seat used has a front airbag, we recommend positioning the car seat as far
back as possible. For cars with front and side airbags, the instructions in the car's
operating manual must also be observed. The car's shoulder/diagonal belt must pass
forwards from the vehicle bracket to the shoulder belt guide (07). Adjust the car seat
position if necessary.
EN
25