Auriol HG00073A Instructions D'utilisation Et Consignes De Sécurité page 38

2. Press the SET / RESET button
between the 12- and 24-hour clock dis-
play modes.
3. Press the CLOCK button to confirm your
settings. The language option flashes.
Tip: If you press and hold down the SET /
RESET button, you accelerate the process
and reach the desired value more quickly.
This quicker method can also be used for
making the following settings. If during
a period of 30 seconds no buttons are
pressed, the LC display returns automati-
cally to the default display.
4. Press the SET / RESET button to set the
desired language (GE = German,
FR = French, SP = Spanish, IT = Italian,
EN = English).
5. Press the CLOCK button to confirm your
settings. The time zone display flashes.
6. Press the SET / RESET button to set the
desired time zone for time zone 2 (–12
hours to +12 hours).
Note: Should you be in a country in
which the DCF signal can be received but
the time is different to your current local
time, you can use the time zone setting to
have the clock display your current local
time. If you find yourself in a country in
which, for example, the local time is an
hour ahead of Central European Time
(CET), you set the time zone to +01. The
clock is now still controlled by DCF but
shows the time as one hour ahead of
38 GB/IE
to switch
21