VOLTCRAFT PL-135 Mode D'emploi page 27

• Please handle the product carefully. Jolts, impacts or a fall even from a low
height can damage the product.
• Also observe the safety and operating instructions of any other devices
which are connected to the product.
• Make sure the cables do not get crimped, bent or damaged by sharp
edges.
• Never use the product immediately after it has been brought from a cold
room into a warm one. The condensation generated could destroy the
product. Allow the device to reach room temperature before connecting
and using it. This may take several hours.
• In schools, educational establishments, hobby and self-help workshops,
the operation of this product must be monitored by trained personnel.
• For installations in industrial facilities, follow the accident prevention
regulations for electrical systems and equipment of the government safety
organization or the corresponding authority for your country.
• Connect the appliance to a wall socket that can be accessed easily.
• Only connect the power adaptor to a normal mains socket connected to
the public supply. Before plugging in the power adaptor, check whether
the voltage stated on the power adaptor complies with the voltage of your
electricity supplier.
• Never connect or disconnect power adaptors if your hands are wet.
• Never unplug the power adaptor from the mains socket by pulling on the
cable; always use the grips on the plug.
• Always lay the cables so that nobody can trip over or become entangled in
them. This poses a risk of injury.
• For safety reasons, disconnect the power adaptor from the mains socket
during storms.
27