Technical Characteristics; Technical Specifications - Baier BSM 2868 Traduction Du Mode D'emploi Original

EN
3

Technical Characteristics

3.1

Technical specifications

High­speed mixer type
Manufacturer
ID No.
Operating voltage (V / Hz)
Power consumption (watt)
Protection class
Speed in 1st gear (min
-1
Speed in 2nd gear (min
Bit holder
PRCD
Weight (kg)
1)
Speed electronics
Sound measurement
2)
L (sound pressure) dB (A)
pA
L (sound power) dB (A)
WA
Vibration measurement:
Handle m/s
2
Weight according to EPTA procedure 01 / 2003
1)
Measured values for noise determined according to EN 60745. Wear hearing protection!
2)
Total vibration values (vector sum in three directions) determined according to EN 60745.
3)
The vibration emission values given in this instruction manual have been measured according to a method
of measurement standardised in EN 60745 and can be used for comparison between power tools. They are
also suitable for a preliminary estimate of the vibratory stresses.
The vibration emission values given represent the main applications of the power tool. If the power tool
is used for other applications, with different insert tools or are insufficiently serviced, this can significantly
increase the vibratory stresses over the whole work period. For a precise estimate of the vibration emission
values, the times during which the tool is switched off or is running but not actually in use should also be tak-
en into account. This can reduce the vibration stresses over the whole work period significantly.
WARNING
Health risk due to vibrations.
Î Additional safety measures should be taken to
protect the user, e.g. wearing anti-vibration pro-
tective gloves, correct maintenance of power
tools and insert tools, keeping hands warm and
good organisation of work sequences.
| 22 |
)
)
-1
K = 3 dB
K = 1.5 m/s
3)
Maschinenfabrik OTTO BAIER GmbH
9567
~110 / 50 / 60
Yes
5.6
2
2.9
BSM 2868
9566
~230 / 50 / 60
1800
/ II
220
470
M14x2
–
5.5
no
91
100
2.9