Technical Characteristics; Technical Specifications - Baier BSM 160 Traduction Du Mode D'emploi Original

3

Technical Characteristics

3.1

Technical specifications

High­speed mixer type
Manufacturer
ID No.
Operating voltage (V / Hz)
Power consumption (watt)
Protection class
No load speed 1st gear (min
No load speed 2nd gear (min
Bit holder
Spiral stirrer (Ø max. mm)
Weight (kg)
1)
Speed electronics
Sound measurement
2)
L (sound pressure) dB (A)
pA
L (sound power) dB (A)
WA
Vibration measurement:
Handle m/s
2
Weight according to EPTA procedure 01 / 2003
1)
Measured values for noise determined according to EN 62841. Wear hearing protection!
2)
Total vibration values (vector sum in three directions) determined according to EN 62841.
3)
The vibration emission values given in this instruction manual have been measured according to a method
of measurement standardised in EN 62841 and can be used for comparison between power tools. They
are also suitable for a preliminary estimate of the vibratory stresses.
The vibration emission values given represent the main applications of the power tool. If the power tool is
used for other applications, with different insert tools or are insufficiently serviced, this can significantly
increase the vibratory stresses over the whole work period. For a precise estimate of the vibration
emission values, the times during which the tool is switched off or is running but not actually in use should
also be taken into account. This can reduce the vibration stresses over the whole work period significantly.
WARNING
Health risk due to vibrations.
Î Additional safety measures should be taken
to protect the user, e.g. wearing anti-vibration
protective gloves, correct maintenance
of power tools and insert tools, keeping
hands warm and good organisation of work
sequences.
)
-1
)
-1
K = 3 dB
K = 1.5 m/s
3)
Maschinenfabrik OTTO BAIER GmbH
9830
~110 / 50 / 60
2
BSM 160
9677
~230 / 50 / 60
1600
/ II
180 – 460
300 – 750
M14x2
160
3.5
Yes
88.3
99.3
0.496
| 23 |