Using And Handling The Power Tool; Service - Baier BSM 2868 Traduction Du Mode D'emploi Original

EN
f) Wear suitable clothing. Do not wear loose
clothing or jewellery. Keep your hair, clothing
and gloves away from moving parts.
Loose clothing, jewellery and long hair can get
caught in moving parts.
g) If dust extraction and collection devices can
be installed, ensure that these are connected
and are used correctly.
Use of a dust extraction system can reduce the
hazards caused by dust.
h) Don't be lulled into a false sense of safety and
do not break the safety rules for power tools
even if, after much use, you are familiar with
the power tool.
Careless action can cause severe injuries within
fractions of a second.
2.4 Using and handling the power
tool
a) Do not overload the tool. Use the intended
power tool for your work.
You work better and safer within the given power
range if you use the suitable power tool.
b) Do not use a power tool whose switch is
defective.
A power tool which can no longer be switched on
or off is dangerous and must be repaired.
c) Remove the plug from the plug socket and/
or remove the battery before carrying out tool
adjustments, changing accessories or placing
the tool aside.
This precautionary measure prevents unintention-
al starting of the power tool.
d) Store power tools out of the reach of children
when not in use. Do not allow people to use
the tool unless they are familiar with it, or if
they have not read this instruction manual.
Power tools are dangerous if they are used by
inexperienced people.
e) Maintain power tools with care. Check
whether moving parts are in proper work­
ing order and do not jam, whether parts are
broken or damaged in such a way that they
impair the function of the power tool. Have
damaged parts repaired before using the tool.
Many accidents are caused by poorly serviced
and maintained power tools.
| 18 |
f) Keep cutting tools sharp and clean at all
times.
Carefully maintained cutting tools with sharp
cutting edges jam less easily and are easier to
control.
g) Use the power tool, accessories, insert tools,
etc. in accordance with this instruction manu­
al. Take into consideration the working condi­
tions and the work to be carried out.
Use of power tools for other than the intended ap-
plications can lead to dangerous situations.
h) Keep the handles and gripping surfaces dry,
clean and free from oil and grease.
Slippery handles and gripping surfaces prevent
safe operation and control of the power tool in un-
foreseen situations.
2.5

Service

a) Have your power tool repaired by qualified
personnel only and use original spare parts
only.
This will ensure that the safety of the power tool
is maintained.