Familiarizing Yourself With Your Appliance; Control Panel; Residual Heat Indicator; Cooking Zones - Bosch NET8069UC Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

4 Familiarizing yourself with your appliance

Familiarizing yourself with your appliance

This Use and Care Manual covers several models. Your model may have some but not all of the features listed.
Familiarizing yourself with your appliance
4.1 Control panel
You can use the control panel to configure all functions of your appliance and to obtain information about the operating
status.
The control panel image is representative. Your appliance may vary slightly.
Touch keys
Touch keys are touch sensitive areas. Touch a symbol to
activate the corresponding function.
Touch key
Function
Main switch
...
Settings area
Select single cooking zone
Select dual cooking zone
Select Bridge zone
clean lock/child
Wipe protection / Panel lock
lock
boost 
SpeedBoost® function
timer
Kitchen timer
Notes
¡ Keep the controls clean and dry. Moisture can impair
the function of the controls.
¡ Do not place cookware close to the displays and sen-
sors. The electronics may overheat.
¡ When you touch several symbols at once, for example
when food spills over, the settings will not change.
Displays
The displays show active settings and functions.
Display
Name
Cooktop ready
4.3 Cooking zones
Here you can find an overview of the cooking zones avail-
able on your cooktop. Place the cookware on the cooking
zone that best matches its size.
When a cooking zone is active, the corresponding displays
light up.
Familiarizing yourself with your appliance en-us
Display
Name
-
Power levels
/

Residual heat indicator

Indicated function active
Cooking zone selected
SpeedBoost® function active
Dual cooking zone active
Bridge zone active
Timer value
Timer indicator
4.2 Residual heat indicator
The cooktop is equipped with a residual heat indicator for
each cooking zone. The residual heat indicator lights up
when a cooking zone is turned off. Do not touch the cook-
ing zone when the residual heat indicator lights up.
Display
Meaning
The cooking zone is hot.
Tip: You can keep a small quantity of food
warm or melt a chocolate coating.
The cooking zone is hot.
The residual heat indicator automatically turns on after a
power failure. The display lights up for approximately
30 minutes.
Refer to the overview of models and dimensions.
→ Page 2
9

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Net8069sucNet8669ucNet8669suc

Table des Matières