Intended Use; Delivery Content - VOLTCRAFT DT-30LK Mode D'emploi

3. Intended use

The product is designed to measure and display rotation speed and belt speed. Measurements
are either non-contact via the built-in laser or per direct contact using the included adapters.
The measured values are shown on the 5-digit LC display. The product features a memory with
space for 40 measured values which allows the user to retrieve the maximum, minimum and
average values from a stored measuring procedure.
Power supply is via a 9 V block battery.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in bath-
rooms, must be avoided under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this product. Using the
product other than for its intended purpose as described above can damage the product or pose
a risk of injury. Read the instructions carefully and store them in a safe place. Make this product
available to third parties only together with its operating instructions.
All company names and product names are trademarks of their respective owners. All rights
reserved.

4. Delivery content

• Tachometer
• 3x contact adapters
• Adapter holder
• Extension attachment
• 9 V block battery
• 3x 20 cm reflective stripes
• Carry case
• Operating instructions
Up-to-date operating instructions
1
Download the latest operating instructions at www.conrad.com/downloads
or scan the QR code shown. Follow the instructions on the website.
20