Positioning The System - Sony HT-CT260H Mode D'emploi

Masquer les pouces Voir aussi pour HT-CT260H:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

C:\Users\ALAYA-Win7\Desktop\Eric's Data\HT-
CT260H\07_FromDTP\02_UC\02_US\US\030GET.fm
010COV.book Page 16 Wednesday, April 10, 2013 7:42 PM

Positioning the system

The illustrations below are examples of how to install the Sound Bar.
Installing the Sound Bar
Installing the Sound Bar on a rack
Notes
Take following precautions when installing the Sound Bar and the subwoofer.
 Do not block the ventilation holes on the rear panel.
 Do not place the Sound Bar and the subwoofer in a metal cabinet.
 Do not place an object such as an aquarium between the Sound Bar and the
subwoofer.
 Place the subwoofer close to the Sound Bar in a same room.
When the Sound Bar is placed in front of a TV, the TV may not be controlled with the
remote control of the TV. In that case, place the Sound Bar away from the TV. If the
remote control of the TV still cannot control the TV, set "IR REP" of the AMP menu to
"ON" (page 27).
Make sure that the remote control of the TV cannot control the TV, then set "IR REP"
to "ON." If it is set to "ON" when the remote control can control the TV, appropriate
operation may not be obtained, because of the interference between the direct
command from the remote control and the command via the Sound Bar.
16
US
Installing the Sound Bar on a wall
(page 17)
4-463-522-11(1)
masterpage: Left
HT-CT260H

Publicité

Table des Matières
loading

Table des Matières