Initial Setup; Initial Setup With Auto Start-Up Wizard; Playback - Pioneer VSX-S520D Mode D'emploi

> Before Start > Part Names

Initial Setup with Auto Start-up Wizard

Initial Setup

1
TV's remote controller
3
> Install > Initial Setup
2
4
> Playback
Supplementary information | Advanced Setup | Others
Initial Setup starts automatically
1. Switch the input on the TV to that assigned to the unit.
2. Put batteries into the remote controller of this unit.
3. Press Í on the remote controller. When power turns on
for the first time, an Initial Setup screen is automatically
displayed on the TV to allow you to make settings
required for start up.
Initial Setup
Language Select
4. Follow the on-screen instructions to select the item with
the cursors of the remote controller and press ENTER to
confirm your selection.
0 To return to the previous screen, press
To redo Initial Setup: If you terminate the procedure on the
way or want to change a setting made during Initial Setup,
press on the remote controller, select "Miscellaneous" -
"Initial Setup" in the System Setup menu from Home and
press ENTER. To select the language displayed again,
change "OSD Language". (P47)
English
Deutsch
Français
Español
Italiano
Nederlands
Svenska
Русский язык
中文
.
E
N
19