Pioneer VSX-S520D Mode D'emploi page 58

> Before Start > Part Names
in "AV Adjust" - "MCACC" - "Manual EQ Select" (P44).
Front Left After selecting the speaker frequency from between "63 Hz" and
"16 kHz" with the cursors /, adjust the volume of that
frequency between "-12.0 dB" and "+12.0 dB" with /. (Default
Value is "0.0 dB")
0 If an item cannot be selected even though connection is
correct, check that the settings in "System Setup" - "Speaker"
- "Configuration" - "Speaker Channels" (P49) matches the
number of connected channels.
0 "63 Hz" can only be selected when this speaker is set to
"Large" in "System Setup" - "Speaker" - "Crossover" (P49).
Center After selecting the speaker frequency from between "63 Hz" and
"16 kHz" with the cursors /, adjust the volume of that
frequency between "-12.0 dB" and "+12.0 dB" with /. (Default
Value is "0.0 dB")
0 If an item cannot be selected even though connection is
correct, check that the settings in "System Setup" - "Speaker"
- "Configuration" - "Speaker Channels" (P49) matches the
number of connected channels.
0 "63 Hz" can only be selected when this speaker is set to
"Large" in "System Setup" - "Speaker" - "Crossover" (P49).
Front Right After selecting the speaker frequency from between "63 Hz" and
"16 kHz" with the cursors /, adjust the volume of that
frequency between "-12.0 dB" and "+12.0 dB" with /. (Default
Value is "0.0 dB")
0 If an item cannot be selected even though connection is
correct, check that the settings in "System Setup" - "Speaker"
- "Configuration" - "Speaker Channels" (P49) matches the
number of connected channels.
0 "63 Hz" can only be selected when this speaker is set to
"Large" in "System Setup" - "Speaker" - "Crossover" (P49).
> Install > Initial Setup > Playback
Supplementary information |
Height Left After selecting the speaker frequency from between "63 Hz" and
"16 kHz" with the cursors /, adjust the volume of that
frequency between "-12.0 dB" and "+12.0 dB" with /. (Default
Value is "0.0 dB")
0 If an item cannot be selected even though connection is
correct, check that the settings in "System Setup" - "Speaker"
- "Configuration" - "Speaker Channels" (P49) matches the
number of connected channels.
0 "63 Hz" can only be selected when this speaker is set to
"Large" in "System Setup" - "Speaker" - "Crossover" (P49).
Height Right After selecting the speaker frequency from between "63 Hz" and
"16 kHz" with the cursors /, adjust the volume of that
frequency between "-12.0 dB" and "+12.0 dB" with /. (Default
Value is "0.0 dB")
0 If an item cannot be selected even though connection is
correct, check that the settings in "System Setup" - "Speaker"
- "Configuration" - "Speaker Channels" (P49) matches the
number of connected channels.
0 "63 Hz" can only be selected when this speaker is set to
"Large" in "System Setup" - "Speaker" - "Crossover" (P49).
Surround Right After selecting the speaker frequency from between "63 Hz" and
"16 kHz" with the cursors /, adjust the volume of that
frequency between "-12.0 dB" and "+12.0 dB" with /. (Default
Value is "0.0 dB")
0 If an item cannot be selected even though connection is
correct, check that the settings in "System Setup" - "Speaker"
- "Configuration" - "Speaker Channels" (P49) matches the
number of connected channels.
0 "63 Hz" can only be selected when this speaker is set to
"Large" in "System Setup" - "Speaker" - "Crossover" (P49).
Advanced Setup | Others
E
N
57