Navigation And Use - Dometic PCD5501 Manuel D'utilisation

Operation
44 Network Configuration Update Menu
Your new password must be at least eight characters
I
(and include letters, number, or combination) to
avoid a lockout scenario.
If the original password you use to make the update
is less than eight characters, the application will
accept it. However, the application will not allow
you to log in later with an invalid password. You
would have to reset the Wi-Fi module. Using an eight
or more character password should avoid this
lockout situation.
4. Update your password settings.
• Wireless mode: This option allows you to define the
wireless mode.
– Access Point: The Wi-Fi server module will act as an
access point, so that the other personal mobile
devices will connect to it directly.
– Infrastructure: The Wi-Fi server module will be
connected through any other Wi-Fi device or
modem, such as Winegard.
26
• SSID: The default SSID and user name for this multiplex
system will look similar to "LR125-xxxxxx" (xxxxxx =
serial number). You may also customize the SSID.
5. After your password and WiFi settings are updated,
restart your Wi-Fi server and log in with the new
credentials.

4.2.4 Navigation and Use

After successful connection to the Dometic Interact Wi-Fi
network, you are ready to begin using your mobile device
to control the available components within your control
configuration.
The mobile application landing page includes the
following navigation options:
45 Landing Page Navigation
From the landing page, you can tap the following tabs to
reach the desired screen:
• Main Screen: Tap this tab to reach the Main
Navigation screen. Once you reach the Main
Navigation screen, you can navigate to and use the
main screens just as described in the Touch-Screen
Navigation and Use section.
Dometic Interact
EN