Initial Connection; Password And Ssid Settings - Dometic PCD5501 Manuel D'utilisation

Dometic Interact
After you have downloaded the application onto your
mobile device, you can proceed to make the initial
connection to the control.

4.2.2 Initial Connection

Complete the following steps to make the initial
connection to the control from your mobile device:
1. Move into the vicinity of the control to ensure
successful connection.
2. Open your device settings and search for available
Wi-Fi networks.
3. Locate and connect to the Wi-Fi network named
LR-125.
42 Wi-Fi Networks
4. Enter the default password, which is
YourPassPhrase.
You should now be successfully connected to Dometic
Interact. You can proceed to change the password
settings, if desired.
EN

4.2.3 Password and SSID Settings

When you change the SSID or Password, the Wi-Fi
I
module will reset and you must log in again using the
new credentials.
Complete the following steps to change the password:
1. Tap the Settings icon once.
2. Tap Set URL, and then enter 192.168.8.1.
3. Tap the Settings icon once again, and then tap
Network Page.
43 Network Configuration Menu
The following screen appears, where you can update
your password as desired.
Operation
25