Entry Screen; Clock Screen - Dometic PCD5501 Manuel D'utilisation

Dometic Interact

4.1.14 Entry Screen

The Entry screen allows you to monitor and control the
available components within the entry area of your RV,
such as lighting and awnings.
35 Entry Screen
From this screen, you can monitor and control the
following functions:
• Entry Lighting: Use the toggle button for the desired
light source to turn it off or on.
The All Entry Lights toggle button controls all three
I
entry light sources (porch, awning, and utility).
• Awnings: The Awning buttons allow you to extend or
retract the awning. Awnings will have no control unless
the parking brake is engaged.
If you attempt to extend or retract the awnings while
the parking brake is not engaged, an alert appears.
36 Parking Brake Alert
The Awning buttons function as follows:
– Tap the plus button (+) to extend the awning or the
minus button (–) to retract the awning, and a pop-up
message appears (assuming the parking brake is
engaged).
EN
37 Awning Clear Message
– After you have verified that the awning is clear of
obstructions, tap the OK button. The awning is now
ready to extend or retract.

4.1.15 Clock Screen

The Clock screen allows you to monitor various system
statuses, such as temperatures, time and date, and
humidity.
This screen appears when the proximity sensor is out of
the threshold distance (sensing range). For this screen to
appear in standby mode, you must select the Clock
standby option from the Settings screen.
38 Clock Screen
From this screen, you can monitor the following system
statuses:
• Temperature: This inside and outside temperatures
are presented in either degrees Celsius or Fahrenheit,
which you can define from the Settings screen.
• Time and Date: The current time and date are
displayed in the middle of the screen.
• Humidity: The humidity is shown as a percentage,
coming from the onboard humidity sensor reading.
Operation
23