Inserting The Batteries In The Headphones - Sony MDR-DS5000 Mode D'emploi

Inserting the batteries in the headphones

As shown in the illustration below, insert the two supplied rechargeable Ni-Cd
batteries with the ' and ' ends in the correct direction.
When using optional batteries
You can use R6 (size AA) dry-cell batteries, Sony R6 (size AA) Ni-Cd batteries
(NC-AA, NC-AAS), and R6 (size AA) nickel-hydrium batteries (NH-AA) with the
headphones. Insert the batteries as shown above.
Usage times for dry-cell batteries
Battery type
Sony Alkaline Battery LR6/AM3 (N)
Sony Manganese Battery R6P/SUM-3 (NS)
Usage times and charging times for Sony rechargeable batteries (sold
separately)
Battery type
Sony R6 (size AA) Ni-Cd Battery
NC-AA (700 mAh)
Sony R6 (size AA) Ni-Cd Battery
NC-AAS (1000 mAh)
Sony R6 (size AA) Nickel-hydrium Battery
NH-AA (1450 mAh)
*
Time to fully charge the battery when it is completely drained.
1
Usage time
Approx. 90 hours
Approx. 45 hours
Usage time
Approx. 30 hours
Approx. 40 hours
Approx. 60 hours
2
Charging time
Approx. 6 hours
Approx. 9 hours
Approx. 10 hours
(Continued)
Preparation
3
*
GB
17