Hitachi UC 3SML Instructions De Sécurité Et Mode D'emploi page 9

SPECIFICATIONS
Input power source
Charging time
Charger
Weight
APPLICATIONS
For charging the HITACHI batteries type EBM315.
CHARGING METHOD
NOTE: Before plugging into the receptacle, make sure the following points.
The power source voltage is stated on the nameplate.
The cord is not damaged.
WARNING:
1. Insert the charger connecting plug into the connecting socket of the charger.
(Fig. 1)
2. Connect to the power source.
When using the AC adapter
Insert the AC adapter into the receptacle.
When using the cigarette lighter connecting plug
Secure the battery charger in place in the car.
Use the strap supplied with the battery charger to fasten the battery charger in place
and prevent it from moving inadvertently. (See Fig. 2)
WARNING:
DC 12V
Approx. 60 minutes .......... EBM315
Charging voltage .............................. DC 3.6 V
Charging current .............................. DC 1.5 A
0.4 lbs (0.2kg)
Do not charge at voltage higher than indicated on the nameplate.
If charged at voltage higher than indicated on the nameplate, the
charger will burn up.
WARNING:
Do not use the electrical cord if damaged. Have it repaired immediately.
Do not place the battery charger or battery under the driver's seat.
Secure the battery charger in place to prevent it from moving
inadvertently as this may lead to an accident.
English
9