Applications; Charging Method - Hitachi UC 18YFL Instructions De Sécurité Et Mode D'emploi

English
SPECIFICATIONS
Model
Input power source
Charging time
Charger
Weight

APPLICATIONS

For charging the HITACHI batteries types EB7, EB9, EB12, EB14, EB18, BCL14 series and
EBM1830.

CHARGING METHOD

NOTE: Before plugging into the receptacle, make sure the following points.
The power source voltage is stated on the nameplate.
The cord is not damaged.
WARNING:
8
UC18YRL / UC18YFL
Single phase: AC 120 V, 60 Hz
Approx. 20 minutes .......... EB712S, EB7S, EB714S, FEB7S,
Approx. 30 minutes .......... EB7B, EB9B, EB12B, EB1220BL,
Approx. 35 minutes .......... EB924, EB1224, EB1424, EB1824L
Approx. 40 minutes .......... EB926H, EB1226H, EB1426H,
Approx. 45 minutes .......... EB930H, EB1230H, EB1230HL,
Approx. 50 minutes .......... EB933X, EB1233X, EB1433X,
EB1833X
Charging voltage .............. DC 7.2–18 V
Charging current .............. DC 3.5 A
1.3 lbs (0.6 kg)
Do not charge at voltage higher than indicated on the nameplate.
If charged at voltage higher than indicated on the nameplate, the
charger will burn up.
EB912S, EB9S, EB914S, EB914,
FEB9S, EB1212S, EB12S, EB1214S,
EB1214L, FEB12S, EB1412S,
EB1414S, EB1414, EB1812S,
EB1814SL
EB14B, EB18B EB1820, EB1820L
EB1826HL
EB1230X, EB1430H, EB1430X,
BCL1430, EB1830H, EB1830HL,
EB1830X, EBM1830