SEVERIN WK 3477 Mode D'emploi page 20

carried out by our customer
service.
Overview and parts included
1. Lid insert
2. Lid
3. Water container
4. Handle
5. Power cord with plug
6. Base
7. Tea fi lter
Control panel
8. On/Off button
9. Indicator light Heating-up
10. Temperature button
11. Indicator light Keeping-warm
12. Selector button Keeping-warm /
Heating-up
13. Display
Thermal safety cut-out
The pre-set thermal safety cut-out protects
the heating element from overheating
should the appliance be erroneously
switched on without any water, or if the
heating plate is calcifi ed. If the safety
cut-out has been activated, the appliance
cannot be switched on again. In such a
case, the appliance must be allowed to
cool down, or must be descaled, before it is
switched on again.
20
Temperature selection
The appropriate temperature for the
particular type of tea can be selected using
the Temperature button
panel.
Water temperatures for making tea
We recommend the following
temperatures:
Green tea : 70-80 °C
White tea :
Oolong tea :
Black tea : 100 °C
Herbal tea : 100 °C
Note: Please also refer to the tea
manufacturer's instructions.
∙ The current water temperature in the
container (≥ 20 °C) is shown on the
display.
∙ Pressing the Temperature button
repeatedly increases the temperature
selection in 5-degree steps.
∙ If the current temperature inside the
container exceeds the temperature
selected, the appliance cannot be
started; in this case, a sequence of
three beep signals is heard.
∙ Temperatures below 40 °C cannot be
selected.
Automatic switch-off
Unless the keep-warm function has
been selected, the kettle will switch off
automatically around 15 minutes after the
last operation.
In the keep-warm mode, it switches off after
30 minutes.
on the control
80 °C
90 °C