Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Consumption values
Programme
1
2
3
4
5
1) The pressure and the temperature of the water, the variations of the mains supply, the
options and the quantity of dishes can change the programme duration and the
consumption values.
Information for test institutes
For all the necessary information for test performance. send an email to:
info.test@dishwasher-production.com
Write down the product number (PNC) that is on the rating plate.

5. OPTIONS

Activate or deactivate the op-
tions before the start of a pro-
gramme. You cannot activate or
deactivate the options while a
programme operates.
If one or more options are set,
make sure that the related indi-
cators are on before the pro-
gramme starts.
5.1 ExtraHygiene
With this option you have better hygiene
results. During the rinsing phase, the
temperature stays at 70 °C for at least 10
minutes.
1)
Duration
(min)
40 - 150
130 - 150
30
195
70 - 80
Energy
(kWh)
0.5 - 1.2
1.1 - 1.2
0.8
0.79
0.6 - 0.9
How to activate the ExtraHygiene
option
1. Press ExtraHygiene. The related in-
dicator comes on. In the display you
can see the update of the pro-
gramme duration.
• If the option is not applicable to
the programme, the related indica-
tor flashes quickly 3 times and then
goes off.
5.2 Multitab
Activate this option only when you use
the combi detergent tablets.
This option deactivates the use of rinse
aid and salt. The related indicators stay
off.
The programme duration can increase.
ENGLISH
57
Water
(l)
6 - 11
10 - 11
7
8.9
10 - 11

Publicité

Table des Matières
loading

Table des Matières