Blade ® Mcx2 Contents; First Flight Preparation; Flying Checklist - E-FLITE Blade mCX2 BNF Manuel D'utilisation

Warning
An RC helicopter is not a toy! If misused, it can cause serious bodily harm and damage to property. Fly
only in open areas, preferably at AMA (Academy of Model Aeronautics) approved flying sites, following
all instructions.
Keep items that can get entangled in the rotor blades away from the main and tail blades, including
loose clothing, pencils and screwdrivers. Especially keep your hands away from the rotor blades.
Blade mCX2 Contents
®
Item
Not Available Separately . . . . . . Blade mCX2 RTF Airframe
EFLH1064B. . . . . . . . . . . . . . . . M LP4DSM 4-Channel Transmitter, 2.4GHz DSMX
EFLB1501S25 . . . . . . . . . . . . . . 150mAh 1-Cell 3.7V Li-Po
EFLC1000 . . . . . . . . . . . . . . . . . 1-Cell 3.7V Li-Po Charger, 0.3A
EFLH1209 . . . . . . . . . . . . . . . . . Screwdriver
Not Available Separately . . . . . . 8 AA Batteries (RTF), 4 AA Batteries (BNF)
(Optional) FUG4 . . . . . . . . . . . . . 4 AA Batteries
*Transmitter and 4 AA Batteries not included with BNF Version

First Flight Preparation

• Remove and inspect contents
• Install four of the included AA batteries in
the charger
• Begin charging the flight battery
• Install the remaining four AA batteries in the
transmitter (RTF ONLY)
• Install the flight battery in the helicopter
(once it has been fully charged)
• Test the controls
• Familiarize yourself with the controls
• Find a suitable area for flying
EN
Description

Flying Checklist

❏ Always turn the transmitter on first
❏ Plug the flight battery into the lead from the
5-in-1 control unit
❏ Allow the 5-in-1 control unit to initialize and
arm properly
❏ Fly the model
❏ Land the model
❏ Unplug the flight battery from the 5-in-1
control unit
❏ Always turn the transmitter off last
4