Bosch PSR 7,2 LI Notice Originale page 39

OBJ_BUCH-781-003.book Page 39 Wednesday, February 2, 2011 3:26 PM
Right rotation: For driving in screws, push the rotational
direction switch 9 left to the stop.
The indicator for right rotation 4 lights up when
the On/Off switch 8 is actuated and the motor is
running.
Left Rotation: For loosening or unscrewing screws, push
the rotational direction switch 9 right to the stop.
The indicator for left rotation 6 lights up when the
On/Off switch 8 is actuated and the motor is run-
ning.
Setting the Torque
With the torque preselection ring 3, the required torque
can be preselected in 10 steps. The inserted tool is
stopped as soon as the set torque is reached.
Position 1:
Lower torque for screwing in screws with small diameter
or into soft materials.
Position 10:
Higher torque for screwing in screws with large diameter
or into hard materials.
Switching On and Off
To start the machine, press the On/Off switch 8 and keep
it pressed.
The power light 7 lights up when the On/Off switch 8 is
slightly or completely pressed, and allows the work area
to be illuminated when lighting conditions are insuffi-
cient.
To switch off the machine, release the On/Off switch 8.
Bosch Power Tools
English | 39
2 609 005 113 | (2.2.11)