Scanning - Xerox FaxCentre F110 Manuel D'utilisation

40
Click in the Print menu on P to edit the
printer settings. You can set whether to print in letter or
landscape format and how many pages should be printed
on a single sheet. Change the print order to print the last
page of your document first. A long document is then
output sorted; the first page lies on top.

Scanning

Insert the document face down into the document input
tray. e lower most document is read into the memory
scanned. You can load up to 20 documents into the paper
input tray.
e installation CD that is delivered with your machine
contains the program P P 8.0. If you select A
P during the installation process, P P
will be installed on your computer along with the C-
 S. Start the program by clicking in the start
menu on the icon D M.
Click on the scan button or select F > S from the
menu bar.
Select the TWAIN Scanner Driver as your scanner. Select
whether you would like to scan a document or a pho-
tograph. Click on S. e TWAIN Scanner Driver
window now opens.
¡
You can also start the scanning process from
any other graphics program if it is supported
by the TWAIN Driver. Select the TWAIN Scan-
ner Driver as your scanner. e TWAIN Driver
selection window then appears, as described be-
low.
If you select the controller on the upper right, a dialogue
appears in which you can select the alignment and filter
settings for the scan.
Using the controls beneath this, you can choose whether
to scan in the black-and-white mode (also called "bar-
code mode") or in the grey tone mode.
Enter the desired resolution for the scanner under R-
.
Click on the lower button S S to commence with
the scanning process. After scanning, the document will
appear in the main window of P Pt. You can now
save it, edit it in a graphics program or process it with the
OCR (Optical Character Recognition) software.
¡
Under the menu item P-, you
can create different profiles. In a profile,
you may save settings that you would like to use
fairly often, for example, for scanning of a fre-
quently-used document-type. First configure all
the settings. en click on N and enter a name
for the profile. Click on S. To scan documents
with the saved settings, select this profile from the
selection menu.
Chapter 7. PC Connection