Operating Instruction; Using The Operating Instruction; Warning & Safety Precautions In This Operating Instruction - TE Connectivity AT-SC MK II Mode D'emploi

1-528050-0
1

Operating Instruction

1.1

Using the Operating Instruction

The operation instruction must be constantly within reach of the pneumatic Parallel Crimp Machine
AT-SC MK II. Every machine operator must read and understand the operating instruction in order to
ensure safe and efficient production with this piece of equipment. During the work on or with the machine,
the operator has to follow the guidelines of the operating instruction.
TE Connectivity Germany GmbH declines to accept any liability for damages that are incurred due to the
fact that the instructions on the machine or in the operation instruction have been disregarded.
The user is responsible for supplementing the operation instruction with any instructions resulting from
current national regulations for accident prevention and protection of the environment.
The German original version is legally binding.
This operating instruction has to be guarded for later use.
1.2 Warning & Safety Precautions in this Operating Instruction
The following warnings and safety related cautionary notices in the individual chapters alert you to various
levels of danger:
DANGER!
Identifies an imminent, serious danger, which, if it is not avoided, will lead to serious
injuries or even to death.
CAUTION!
Identifies a possible danger, which, if it is not avoided, will lead to serious injuries or even to
death.
ATTENTION!
Identifies a potential dangerous situation, which, if it is not avoided, can lead to medium or
minor injuries or material damages.
INFORMATION:
If this information is not followed, it can lead to a deterioration of the operating procedure.
Page 37 / 94
412-94233 REV. D1