11.1.2 Monthly; 11.1.3 After Every 25.000 Crimp Cycles Or Every 2 Years - TE Connectivity AT-SC MK II Mode D'emploi

1-528050-0

11.1.2 Monthly

- Lubricate the upper press shaft with the
supplied grease gun at the grease nipple (Fig.
11.01) with one of the following greases:
Blaser Swiss Lube Art.-No. 00492-01 EP-
-
Universal Fett.
Molykote DX Paste
-
Dininol Fett LGM2, Art.-Nr. 27620
-
(Zellner+Gmelin GmbH & Co. KG)
Alternatively, lithium soap greases with the
following application areas can be used:
- Sliding surfaces / friction contacts
- High load applications
- „Clean" lubrication
- Low speed
- Base oil viscosity at 40°C (-4°F)
(DIN 51562): 110mm²/s

11.1.3 After every 25.000 crimp cycles or every 2 years

Please contact TE Connectivity Germany GmbH for inspections in the recommended intervals.
Page 56 / 94
412-94233 REV. D1
Fig. 11.01