TE Connectivity AT-SC MK II Mode D'emploi page 42

1-528050-0
 Maintenance work may be performed only by authorized and properly trained personnel. The housing
and the covers in particular may only be removed by specially trained personnel.
 Disconnect the pneumatic Parallel Crimp Machine AT-SC MK II from the air supply before attempting
any maintenance work. Due to the risk of hand or finger injury, never try to reach into the machine
before having assured that the machine is disconnected from the air supply.
 Exercise caution at all times when the pneumatic Parallel Crimp Machine AT-SC MK II is switched on.
 The pneumatic Parallel Crimp Machine AT-SC MK II is only allowed to be used with a mounted
adapter.
 It is only allowed to work with the specified crimping force.
 The pneumatic Parallel Crimp Machine AT-SC MK II may only be set up and operated in perfect
technical condition, observing all the safety regulations and considering any possible dangers.
 The crimp machine is only allowed to be used when it is in completely functional condition.
 Check the release button before starting the work on the crimp machine.
 In cases of a machine malfunction, production must be stopped and the malfunction must be fixed
before continuing work with the machine.
 Only one person is allowed to work on or with the machine at a time.
 Only trained personal are allowed to work on or with the machine.
 When working with the pneumatic Parallel Crimp Machine AT-SC MK II, do not wear loose clothing,
jewellery or long, loose hair that can get caught in the mechanism.
 Work with caution.
 Wear protective gloves and safety glasses during lubrication work. Please pay attention to the safety
instructions in the "safety data sheet" of the grease.
 Wear suitable safety shoes when transporting or disassembling the machine.
Page 42 / 94
412-94233 REV. D1