Service Information; Customer Service In Case Of Interruption - TE Connectivity AT-SC MK II Mode D'emploi

1-528050-0
12

Service information

12.1

Customer Service in case of interruption

DANGER!
 Due to the risk of hand or finger injury, never try to reach into the machine before
having assured that the machine is disconnected from the air supply. The machine
has to stand still before changing the adapter or the dies.
CAUTION!
 The crimp machine is only allowed to be used with mounted dies and die adapter.
 The pneumatic Parallel Crimp Machine AT-SC MK II may only be set up and
operated in perfect technical condition, observing all the safety regulations and
considering any possible dangers.
 Assure free access to the operating elements of the machine, especially the foot
pedal and the release button. In the case of imminent danger immediately press the
release button. The release button must be within the direct reach of the operator. It
must not be covered.
 Check the release button before starting the work on the crimp machine.
 When working with the pneumatic Parallel Crimp Machine AT-SC MK II, do not wear
loose clothing, jewellery or long, loose hair that can get caught in the mechanism.
 Work with caution.
 In cases of a machine malfunction, production must be stopped and the
malfunction must be fixed before continuing work with the machine.
 Only one person is allowed to work on or with the machine at a time.
 Only trained personal are allowed to work on or with the machine.
 It is only allowed to work with the specified crimping force.
INFORMATION:
 In case of a blockade of the dies press the release button and disconnect the
machine from air supply.
In the event of a problem, our customer service personnel will be able to help you:
TE Connectivity Germany GmbH
a TE Connectivity Ltd. company
Schenck Technologie- und Industriepark
Landwehrstr. 55/Gebäude 83
DE-64293 Darmstadt
TE AT Kundendienst-Hotline: +49(0)6151-607-1518
E-Mail:
TEFE1@te.com EMEA Field Service Hotline
TEFE2@te.com EMEA Hand Tool Repair
TEFE3@te.com EMEA Wear & Spare Parts
TEFE4@te.com EMEA Field Service Admin & Short Term Rental Equipment
Please have the following information ready when you contact service.
- Machine Type
- Machine Serial Number (see Point 6.1/Fig. 6.02/Pos. 18)
Page 57 / 94
412-94233 REV. D1